Q. 1 – ( a ) Draw the bending moment and shear force diagram for a beam carrying a uniformly distributed load the supports are at a distance of L / 4 from each end L being the length of beam ?
( b ) Design a double reinforced RCC roof slab for a room of size 16’ x 16’.
Q. 2 – ( a ) How would you decide the type of bridge and type of foundations for a bridge to cross a nala of 500 feet width. High flood level is 25 feet above average bed level.
( b ) Show with a sketch layout of reinforcement in RCC Box culvert.
Q. 3 – Write short notes on any four of the following: -
a) S.F.Curve.
b) Poison’s ratio.
c) Pert Chart.
d) Controlled concrete.
e) Load test on pile.
f) Neoperene bearings.
Q. 4 – Indicate specification for any four of the following: -
a) Mass c.c. for bridge abutment.
b) Flooring for heavy repair shed.
c) Asphalting of colony roads.
d) Mosaic tile flooring.
e) Wearing course in road surface of a road over bridge.
Q. 5 – Indicate with sketches the method of launching 60 feet Girder spans on a viaduct.
Q. 6 – While carrying out survey for a new railway line, how would you decide the water ways required for a bridge.
Q. 7 – Design a water supply scheme for a station, adopting the following data –
a) Source of water – River flow at a distance of 1 km.
b) Requirement of water – 1 lack gallons per day.
c) Difference in level between water level in river and level to which water is to be pumped – 200 feet.
No comments:
Post a Comment